01 // THE OPENING STATEMENT
Philosophy
In the transfer of fluid, variance is failure. TØRR STATICS designs hardware to eliminate the variables of pressure, friction, and vacuum creep. We build instruments of equilibrium for general laboratory use.
We operate in the void between statics (fluids at rest) and dynamics (fluids in motion). Our mission is to make the interface disappear, leaving only the pure transfer of matter.
02 // LABORATORY HARDWARE
Store
Payment accepted: USDT (ERC-20) & ETH — Ethereum network only
Hardware Unit
ISOBAR Ø1
Dual-vial fluid transfer unit. Closed-loop pressure environment. Eliminates vacuum creep and transfer variance. Laboratory Grade Polymer / SS 304.
Consumable — 50 Pack
POISE Ø27
27G Extra Thin Wall cannula hub. 5-Bevel grind. 0.41mm OD ±0.01mm tolerance. Polypropylene construction. Maximum flow efficiency with minimal penetration resistance.
Consumable — 100 Pack
POISE Ø27 — BULK
Bulk laboratory pack. 100× POISE Ø27 cannula hubs. Same specifications, reduced per-unit cost for high-throughput environments.
// HARDWARE: ISOBAR Ø1
The Controlled System.
The Isobar Ø1 is a dual-vial fluid transfer unit engineered to resist vacuum creep. By establishing a closed-loop pressure environment, it ensures that the internal pressure of the receiving vial matches the ambient environment, preventing aerosolization and transfer variance.
// CONSUMABLE: POISE Ø27
The Seal.
A precision-machined cannula hub assembly designed for minimal penetration resistance and maximum flow efficiency. The Poise Ø27 utilizes polypropylene construction with a 16-groove thread pattern (0.8mm pitch) and Extra Thin Wall geometry to deliver 25G-equivalent flow in a 27G footprint.
// POISE Ø27 vs. STANDARD 27G
| Specification | Standard 27G | POISE Ø27 |
|---|---|---|
| Wall Type | Regular Wall (RW) | Extra Thin Wall (ETW) |
| Outer Diameter | 0.40mm | 0.41mm ±0.01 |
| Inner Diameter | 0.21mm | 0.29mm (+38%) |
| Flow Rate (equiv.) | 27G | 25G performance |
| Bevel Geometry | 3-Bevel | 5-Bevel (reduced resistance) |
| Tolerance | ±0.05mm | ±0.01mm |
| Length | 13mm | 8mm (optimized) |
// PHILOSOPHY
We do not innovate.
We eliminate.
Every instrument is a negotiation between intent and interference. Friction, dead volume, vacuum creep — these are not engineering challenges. They are engineering failures.
TØRR STATICS exists to reduce the distance between the operator's intent and the physical outcome to zero. We do not add features. We remove variables.
Our name derives from the torr — the unit of pressure equal to 1/760 of a standard atmosphere. It represents the space between states: the threshold where equilibrium holds or collapses. We engineer for that threshold.
// LABORATORY DISPATCH
Engineering updates.
No noise.
Batch production schedules. Tolerance reports. New hardware. Delivered when it matters — nothing more.
03 // LEGAL & REGULATORY
Intended Use Disclaimer
All TØRR STATICS products are designed, manufactured, and labeled exclusively for General Laboratory Use Only. These products are general-purpose laboratory instruments intended for use by trained laboratory personnel in controlled environments.
TØRR STATICS products are not intended for, marketed for, nor should they be used in any application requiring regulatory clearance or approval. The purchaser assumes full responsibility for determining the suitability of any product for their specific application and for ensuring compliance with all applicable local, state, federal, and international regulations.
No Regulatory Claims
TØRR STATICS LLC makes no claims regarding the suitability of its products for any regulated application. No regulatory body has evaluated, cleared, or approved these products for any specific use. All performance specifications are provided for laboratory reference only and do not constitute any warranty of fitness for any particular purpose beyond general laboratory use.
Terms of Sale
- All sales are final. No returns or exchanges except for manufacturing defects.
- Manufacturing defects must be reported within 14 days of receipt with photographic documentation.
- Products are shipped as-is for general laboratory use. No implied warranties of merchantability or fitness for a particular purpose.
- TØRR STATICS LLC liability is limited to the purchase price of the defective product.
- Shipping times are estimates only. TØRR STATICS LLC is not liable for carrier delays.
- Prices are listed in USD. Cryptocurrency payments are converted at the rate displayed at time of checkout.
Payment Terms
- Payment is accepted in USDT (ERC-20) and ETH on the Ethereum network only.
- Each order generates a unique payment address. Send only the specified token to the provided address.
- Sending tokens on the wrong network or sending unsupported tokens may result in permanent loss of funds. TØRR STATICS LLC is not responsible for misdirected payments.
- Orders are confirmed after the transaction receives sufficient network confirmations (typically 12 blocks for Ethereum).
- Overpayments will not be refunded unless they exceed the order total by more than 5%.
Assumption of Risk
The purchaser acknowledges that laboratory equipment involves inherent risks. By purchasing any TØRR STATICS product, the purchaser agrees to:
- Use all products in accordance with standard laboratory safety protocols.
- Ensure all personnel handling TØRR STATICS products are appropriately trained.
- Accept full responsibility for the application of products in their laboratory environment.
- Indemnify and hold harmless TØRR STATICS LLC from any claims arising from product use.
Privacy Policy
TØRR STATICS LLC collects only the minimum information necessary to fulfill orders: email address and shipping information. We do not sell, share, or distribute customer data to third parties. Blockchain transaction data is inherently public; we do not control the visibility of on-chain payment information. No cookies or tracking scripts are used on this website.
Governing Law
These terms shall be governed by and construed in accordance with the laws of the State of Delaware, United States, without regard to conflict of law principles. Any disputes arising from these terms or from any purchase shall be resolved exclusively in the courts of the State of Delaware.